|
1.Working principle: through the fan supply
air, blowing to the heating tube in the heating cylinder, and then
controlled by the temperature controller air supply temperature, uniform
flow in the drying drum, to the purpose of drying
2.The contact part of the machine and raw materials are made of
stainless steel, so that the raw materials are not contaminated,
3.The heating tube is elbow type, effectively prevent dust accumulation
4.This machine has uniform hot air distribution, high drying efficiency,
temperature controller adopts proportional deviation type, temperature
difference is controlled within plus or minus 3 degrees
5.The machine can dry the raw materials which are wet due to packaging
and transportation, and is used to remove the moisture on the surface.
It is suitable for PP, PE, ABS, PVC and other raw materials
|
|
Note:
1.The location of the installation machine needs to consider other
equipment, material stacking, it is recommended to keep appropriate
space around
2.The working environment of the machine requires a
clean and tidy room. When drying raw materials that may produce
poisonous gas, please reserve space for installation of exhaust system
|
设为首页 | 
加入收藏 | 
联系我们 
